Jump to: navigation, search

Difference between revisions of "Recore"

(Created page with "==Software for Recore== ===Distro=== Starting with Armbian Butser Server (kernel 5.4) https://dl.armbian.com/pine64/Buster_current Flash the software to a USB drive. With a...")
(No difference)

Revision as of 19:06, 21 March 2020

Software for Recore

Distro

Starting with Armbian Butser Server (kernel 5.4) https://dl.armbian.com/pine64/Buster_current Flash the software to a USB drive.

With a clean board, it's necessary to start the board from a host computer using FEL mode. ```sunxi-fel -v -p spl sunxi-spl.bin write 0x44000 bl31.bin write 0x4a000000 u-boot.bin reset64 0x44000``` The output will appear in teminal that can be started with: ```minicom -D /dev/ttyUSB0 -w``` If a dongle with Armbian is present in one of the USB host slots, it should boot from the dongle.

Install distro to eMMC

Create Partition: ``` export card=/dev/mmcblk0 blockdev --rereadpt ${card} cat <<EOT | sfdisk ${card} 1,,L EOT mkfs.ext4 ${card}p1 ```

Copy Kernel and rootfs to eMMC

Use the flash script in Redist ```mount /dev/mmcblk0p1 /mnt/ rsync -aAx --human-readable --info=name0,progress2 --exclude={/dev/*,/proc/*,/sys/*,/tmp/*,/run/*,/media/*,/mnt/*,lost+found/} /* /mnt echo "rootdev=/dev/mmcblk0p1" >> /mnt/boot/armbianEnv.txt ```