Jump to: navigation, search

Difference between revisions of "Replicape rev B3/B3A Pinouts"

(Created page with "==Current Board Pinouts== Questions have been asked, concerning what pins are in use by the Replicape and which are still available for use. Below is the pinout for the Beagl...")
 
(Current Board Pinouts)
Line 1: Line 1:
 
==Current Board Pinouts==
 
==Current Board Pinouts==
  
Questions have been asked, concerning what pins are in use by the Replicape and which are still available for use. Below is the pinout for the Beaglebone Black and the current version of the Replicape for your reference.
+
Questions have been asked, concerning what pins are in use by the Replicape and which are still available for use. Below is the pinout for the Beaglebone Black and the current version of the Replicape (version B3A) for your reference.
 +
 
 +
Previous versions can be found in the Legacy Information section on the [[Main_Page|Main Page]]
  
 
[[File:Beaglebone-black-pinout.jpg]]
 
[[File:Beaglebone-black-pinout.jpg]]

Revision as of 22:43, 20 September 2017

Current Board Pinouts

Questions have been asked, concerning what pins are in use by the Replicape and which are still available for use. Below is the pinout for the Beaglebone Black and the current version of the Replicape (version B3A) for your reference.

Previous versions can be found in the Legacy Information section on the Main Page

Beaglebone-black-pinout.jpg

The Replicape board pinout is oriented the same as the Beaglebone pinout, viewed from above with the network connector at the top of the image.

Replicape pinout rev B3.png