Jump to: navigation, search

Replicape rev B3/B3A Pinouts

Revision as of 22:42, 20 September 2017 by Techmav (talk | contribs) (Created page with "==Current Board Pinouts== Questions have been asked, concerning what pins are in use by the Replicape and which are still available for use. Below is the pinout for the Beagl...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Current Board Pinouts

Questions have been asked, concerning what pins are in use by the Replicape and which are still available for use. Below is the pinout for the Beaglebone Black and the current version of the Replicape for your reference.

Beaglebone-black-pinout.jpg

The Replicape board pinout is oriented the same as the Beaglebone pinout, viewed from above with the network connector at the top of the image.

Replicape pinout rev B3.png